What are the technical characteristics of NC milling cutter

Speaking of CNC milling cutter head products, I believe you all know something. With the wide application of CNC milling cutter head, more and more users begin to pay attention to our products. Next, our staff will give you a brief explanation.

 

1. The non-cutting edge of NC milling cutter head should be rounded. After grinding, the cutting edge should be straight and the deviation of linearity should not exceed 0.008mm.

 

2. The surface roughness, dimensions and tolerances of each part of the NC milling cutter head shall meet the requirements of design drawings or standards.

 

3. Cutting cutter head should be sharp, and there should be no cracks, burrs, disintegration and oxidation color.

 

4. The taper of the matching hole (2 24') should be checked by colouring method. The colouring area of the matching hole should be more than 96% of the surface of the hole.

 

5. The deviation of tool tip diameter, outer and inner cutting of NC milling cutter head should not exceed (+0.01 mm).

 

The above is about CNC milling cutter head related content, if you want to know more exciting information, please check our website update in time.